The US Army Contracting Command-Redstone, following the successful completion of Product Verification Audit (PVA) and timely delivery of the initial 24 pieces, issues next delivery order to General Electrodynamics Corporation (GEC) for continuing repair and overhaul of one-hundred and eighty-three (183) pieces of Apache Searchlights. The assets have been shipped to GEC and the overhaul work will commence in March 2024 at a rate of no less than 25 per month up through June 2025. The US Army Contract is a 5 year, IDIQ with the expected remaining quantity to reach 1,290 over the next 4 years.
GEC and CTECH Partner
GEC and CTECH Partner
Providing a durable, effective, easy to use weighing and storage solution for CVE Officers
General Electrodynamics Corporation (GEC) and CTech have partnered on a new, very durable, easy to use “CopBox” that make’s Commercial Vehicle Enforcement officers’ job more efficient and safer. Housed in the new “copbox” is GEC’s portable MD600L mechanical handheld scale. The MD600L is built with a 60 year history behind it, one with a proven track record of durability and reliability. With it’s fully-mechanical, intrinsically safe design, GEC still wanted to take it a step further providing even more convenience and safety with scale use.
Knowing GEC had to provide a storage solution to go along with the MD600L scale; it needed to be as durable with the same quality and user friendly as the products they provide day-in and day-out. That is when it began discussions with the CTECH team. It was evident from the start that the mission of excellence aligned and the two teams were equally driven to provide the law enforcement community a long lasting storage solution built with quality in mind.
CTECH’s enginering team was easy to work with during the many discussions designing the two MD600L CopBox. They were intent on providing the solution GEC was looking for while offering professional insight on the best solutions in the marketplace. Now, GEC provides both a 4 unit and a 6 unit option for the law enforcement communities purchasing the MD600L; GEC’s COO stated “we could not be happier with the final outcome of the collaberation and design”. These boxes have the ability to fit in the back of officer’s SUVs with CTECH’s QuickLink Mounting System; This allows the officer to easily move the unit from one vehicle into the next vehicle with the new mounting solution. The Cop Box also mounts in the back of other various vehicle types with a rollout base, a setup GEC has chosen while showing agencies the MD600L.
Throughout our travel to different departments and agencies, GEC has heard nothing but praise for the MD600L scale and the storage solution provided by CTECH. We thank you for the outstanding partnership with CTECH in this venture; their professional demeanor, attention to detail, and commitment to superior quality is evident in the MD600L, 4 and 6 scale CopBoxes. Go to www.gecscales.com for more information on the MD600L. Don’t hesitate to give us a call at 1-800-551-6038 with any questions about our new scale or copbox.
IMP Aerospace & Defense Chooses the GEC AN60Z
In September of 2020, IMP Aerospace contacted GEC regarding their need for weighing equipment for their C-130 Hercules Program. In May of 2021, they received their custom C-130 configured weighing system. The compact size and portability of the AN60Z scale system worked perfectly with their hangar setup and the Best-in-Class AN60Z did not disappoint. The AN60Z’s superior accuracy and ability to read out in 1 lb. increments made it an easy choice for IMP. They look forward to many years of performance and repeatability out of this system. GEC’s aircraft platform scales are designed for the long haul, and maintain their annual calibration cycle for decades. That’s right, decades, when other scales are being repaired needing costly, overloaded shear beam load cells replaced just to be calibrated properly. GEC has been providing weighing equipment for airlines, MROs, business aviation and military aviation for well over 40 years, and we continue to innovate.
Terrafugia Chooses GEC’s Ulp410 Lite Wireless Aircraft Scale System for Flight Test Program
Terrafugia’s lead flight test engineer contacted GEC to determine the most accurate low profile, light aircraft scale system for their experimental and flight test “Transition Aircraft”, the future of personal transportation.
Glen Rowe stated, “the safety of flight has been and will always be, the first priority with our company, as it has been mine for the past 40 years in the aviation industry”. Terrafugia’s continued safety, reliability and success is highly dependent on the quality of the equipment we use and is why we evaluated all OEM aircraft weighing systems. GEC’s ULP410 Lite’s accuracy, .05 lb. increment, equipment life and standard calibration interval of 12 months or longer compared to a fully electronic shear-beam loadcell system, is why we chose GEC ‘s ULP410 Lite.
The accuracy and repeatability is unmatched by any other OEM in the world. GEC maintains an AS9100D Aerospace Quality Management Certification which represents the superiority of their products and company. Thank you GEC for working with Terrafugia in recommending your new GEC ULP410 System. They are the best! One vehicle, two modes of travel. The “Transition” brings the dream of the flying car to life. It seats two and converts from drive mode to flight mode in under a minute with just the push of a button. Eliminating the hassle of hangar storage, ground transportation, and aviation fuel, the Transition fuels up with automotive gas and can be stored in your home garage. To learn more go to www.terrafugia.com.
General Electrodynamics Corporation WINS USAF Contract for Automated Calibration Presses
September 2019
General Electrodynamics Corporation WINS USAF Contract for Automated Calibration Presses
Heath, OH – General Electrodynamics Corporation (GEC) responded to an RFQ initiated by the United States Air Force, Calibration & Metrology Division for the next generation Auto Calibration Press. These fully automated systems will go to all PMEL facilities worldwide to recalibrate and test portable aircraft and ground vehicle scales. The AFMETCAL mission is to manage the Air Force Metrology and Calibration (AFMETCAL) Programs to ensure Air Force (AF) systems and equipment are accurate, uniform, reliable, and traceable to the National Institute of Standards and Technology (NIST).
A formal technical proposal aligning to the USAF performance specification, program specific terms and conditions including a 5 year warranty requirement as well as detailed past performance customer data was required by each offeror. After thorough USAF evaluation which included validating GEC’s past performance experience of its like product, GEC’s offer was awarded the contact as the best value, technically acceptable. The initial delivery order of the 3 year IDIQ contract is worth $1.6M. The requirements contract is expected to exceed $2.3M. Production will commence when the engineering is complete with the first production unit being delivered early in late 2019.
- 1
- 2
- 3
- 4
- Next Page »